Glass splashbacks
Toughened glass splashbacks in any colour or with your own printed image, made to your sizes.
A glass splashback is one smooth, wipe-clean panel behind your hob, sink or worktop, with no grout lines to stain. We make them in toughened glass to your exact sizes: painted in a colour you choose, printed with your own image, or clear over a wall finish.
Send us your sizes and a colour reference or image, and we reply with a written price.
Choose your splashback
| Type | What it looks like | Good for |
|---|---|---|
| Painted | A solid colour seen through the glass, with a gloss finish | Kitchens, bathrooms, feature walls |
| Printed | Your own photo, pattern or artwork printed onto the glass | Kitchens and commercial interiors |
| Clear or low-iron | Plain glass over the wall behind; low-iron has no green edge tint | Protecting a painted wall or wallpaper |
Behind a hob
A splashback behind a hob should be toughened glass, which takes heat far better than ordinary glass. Leave the gap your hob maker asks for between the burners and the glass.
Colours and printing
Give us a paint or RAL colour reference and we match it as closely as glass allows. White and pale colours look best on low-iron glass, which has no green tint. For a printed splashback, send the highest resolution image you have and we check it is large enough before anything is made.
Sockets and cut-outs
Toughened glass cannot be cut once it is made, so every socket, switch and pipe cut-out is made before toughening. Mark each one from the left edge and from the bottom edge of the panel, and tell us the size of the socket plate.
How to ask for a price
- Measure the space in millimetres: width at the top and bottom, height at both ends. Use the smallest figures.
- Mark sockets, switches and any cut-outs from two edges.
- Send a colour reference, or the image you want printed.
- Tell us whether it goes behind a hob.
Questions we are asked
How thick is a glass splashback?
Most kitchen splashbacks are 6 mm toughened glass. Tell us where it is going and we confirm the thickness with you.
Can I cut the glass to fit on site?
No. Toughened glass cannot be cut or drilled after it is made, so the sizes and cut-outs you send are final.
Can a splashback go over tiles?
Glass needs a flat, sound wall to bond to. Ask your fitter whether your wall is suitable before you order.
Can you print my own photo?
Yes. Send the original file at full size; a photo taken on a phone may be too small for a large panel, and we tell you before anything is made.
Questions
How do I measure?
Measure the glass you need, not the hole it goes in. Allow for the frame and any gap. See our measuring guide.
Where is it made?
At our factory in Tuzla, Istanbul. See inside our factory.
How much is delivery?
It depends on your order and postcode. Your written price includes it. See delivery and returns.
What if I am not sure which one I need?
Choose the closest and tell us in your notes where the glass is going. We check it with you before anything is made.
Can I get technical documents?
Ask us for the technical sheet for this product. Contact us.